Acoustic transmission

transmissionsound transmissiontransmitter
Acoustic transmission is the transmission of sounds through and between materials, including air, wall, and musical instruments.wikipedia
18 Related Articles

Architectural acoustics

acousticsacousticacoustical
Architectural acoustics
Technical solutions depend on the source of the noise and the path of acoustic transmission, for example noise by steps or noise by (air, water) flow vibrations.

Soundproofing

soundproofsound insulationsoundproofed
1) Airborne transmission - a noise source in one room sends air pressure waves which induce vibration to one side of a wall or element of structure setting it moving such that the other face of the wall vibrates in an adjacent room. Structural isolation therefore becomes an important consideration in the acoustic design of buildings. Highly sensitive areas of buildings, for example recording studios, may be almost entirely isolated from the rest of a structure by constructing the studios as effective boxes supported by springs. Air tightness also becomes an important control technique. A tightly sealed door might have reasonable sound reduction properties, but if it is left open only a few millimeters its effectiveness is reduced to practically nothing. The most important acoustic control method is adding mass into the structure, such as a heavy dividing wall, which will usually reduce airborne sound transmission better than a light one.
Acoustic transmission

Acoustic impedance

impedanceacoustical impedanceradiation impedance
The degree to which sound is transferred between two materials depends on how well their acoustical impedances match.

Musical instrument

instrumentsinstrumentmusical instruments
Musical instruments are generally designed to radiate sound effectively.

Stethoscope

stethoscopesbell of the stethoscopeelectronic stethoscope
Stethoscopes roughly match the acoustical impedance of the human body, so they transmit sounds from a patient's chest to the doctor's ear much more effectively than the air does.

Absorption (acoustics)

absorptionsound absorptionabsorb
Acoustic absorption

Acoustic attenuation

attenuationattenuatedattenuation of sound
Acoustic attenuation

Attenuation coefficient

absorption coefficientattenuationAbsorption coefficients
Attenuation coefficient

Noise pollution

noisesound pollutionnoise control
Noise pollution

Reflection (physics)

reflectionreflectedreflective
Sound reflection

Acoustic quieting

acoustic dampeningdecouplingnoise damping
Sound transmissions: by reducing transmission using many methods (depending whether the transmission is through air, liquid, or solid), or

Acoustic microscopy

acousticsC-SAM acoustic microscopic inspectionultrasonic force microscopy
Samples need no special treatment before acoustic imaging, but they should be able to withstand at least brief exposure to water or to another fluid, since air is a very poor transmitter of high frequency acoustic energy from the transducer.

Phantomosaurus

As mentioned, they are sutured to the tubera basioccipitalia, and so could not have moved freely, meaning that they were not bones for the transmission of sound in this manner.

Insulating concrete form

insulated concrete formsInsulating Concrete Formscast-in-place concrete
ICF walls have much lower rates of acoustic transmission.

Curtain wall (architecture)

curtain wallcurtain wallsglass curtain wall
Larger thicknesses are typically employed for buildings or areas with higher thermal, relative humidity, or sound transmission requirements, such as laboratory areas or recording studios.